Skip to content

Featured pages

Related apps & web tools

Related guides

Shopify Apps

Related converters

    Sports

    Major League Baseball pitching stats explained: ERA, WHIP, FIP and K/9

    Major League Baseball pitching stats explained: ERA, WHIP, K/9, K%, FIP and BABIP formulas, a worked season line, box score columns and save rules.

    November 16, 2026 · 8 min read

    Major League Baseball pitching stats explained: ERA, WHIP, FIP and K/9

    Quick answer: the core Major League Baseball pitching stats are ERA (earned runs allowed per nine innings), WHIP (walks plus hits per inning), strikeouts and walks per nine innings (K/9, BB/9), strikeout and walk rates per batter (K%, BB%) and FIP, which grades a pitcher only on the outcomes he controls: strikeouts, walks, hit batters and home runs. Lower is better for ERA, WHIP, BB/9 and FIP; higher is better for K/9 and K%. This guide gives the formula for each one, works through a full season line, and shows how to read a box score.

    The pitching box score, column by column

    A pitching line in an MLB box score reads left to right like this:

    ColumnMeansHow to read it
    IPInnings pitchedCounted in outs: 6.1 means 6⅓ innings (19 outs) and 6.2 means 6⅔ (20 outs). It is never 6.3.
    HHits allowedSingles, doubles, triples and home runs.
    R / ERRuns / earned runsEarned runs leave out runs that scored only because of an error or a passed ball.
    BB / HBPWalks / hit by pitchFree bases; intentional walks are part of BB.
    K (or SO)StrikeoutsOuts with no ball in play, so the defense cannot help or hurt.
    HRHome runs allowedThe most damaging single outcome for a pitcher.
    PC-STPitch count - strikes98-64 means 98 pitches, 64 of them strikes. Two-thirds strikes is a good rate.
    W, L, SV, HLD, BSDecisionsWin, loss, save, hold, blown save (rules below).

    The innings notation trips up almost everyone the first time. Before you divide by innings in any formula below, turn the decimal into thirds: 6.1 becomes 6.333 and 6.2 becomes 6.667.

    ERA: earned run average

    ERA = 9 × earned runs ÷ innings pitched. It answers "how many earned runs would this pitcher allow over a full nine-inning game?" In recent MLB seasons the league ERA has sat around 4.00, so a 3.00 ERA is very good and 5.00 is poor. ERA is the stat most people quote, but it mixes the pitcher with the fielders behind him and with luck on balls in play, and it swings a lot over a few starts.

    ERA+ rescales ERA so that 100 is league average after adjusting for the ballpark: 120 means 20% better than average and 80 means 20% worse. Use it to compare pitchers from different parks or different years.

    WHIP: walks plus hits per inning pitched

    WHIP = (walks + hits) ÷ innings pitched. It counts how many runners a pitcher lets on per inning, ignoring how they scored. Around 1.30 is roughly average in today's game, 1.10 is excellent and anything under 1.00 over a full season is rare. Hit batters are not part of WHIP.

    K/9, BB/9, HR/9 and K/BB

    • K/9 = 9 × strikeouts ÷ innings. Strikeouts per nine innings.
    • BB/9 = 9 × walks ÷ innings. Under 3.0 means good control.
    • HR/9 = 9 × home runs ÷ innings. Around 1.0 or a little over is typical today.
    • K/BB = strikeouts ÷ walks. 3.0 or higher is a strong strikeout-to-walk ratio.

    K%, BB% and K-BB%: the better rate stats

    Per-nine stats depend on how many batters a pitcher faces in an inning: a pitcher who allows lots of base runners faces more hitters and gets more chances to strike them out. Dividing by batters faced (TBF) fixes that.

    • K% = strikeouts ÷ batters faced. League average is in the low 20s; 28% or more is elite.
    • BB% = walks ÷ batters faced. Around 8% is average; 6% or lower is very good.
    • K-BB% = K% minus BB%. One of the most stable quick measures of pitching skill; high teens is very good.

    FIP: fielding independent pitching

    FIP = (13 × HR + 3 × (BB + HBP) − 2 × K) ÷ IP + FIP constant. FIP looks only at the outcomes a pitcher controls and ignores every ball in play, so a bad defense or a run of bloop singles does not count against him. The constant (about 3.1 in most recent seasons) is reset every year so that league FIP equals league ERA, which lets you read FIP on the same scale as ERA. When a pitcher's ERA is far above his FIP he has usually been unlucky or let down by his fielders, and his ERA tends to come down; the reverse is also true.

    BABIP: batting average on balls in play

    BABIP = (H − HR) ÷ (AB − K − HR + SF). It is the share of balls hit into the field of play that fall for hits. Most pitchers end up close to the league figure of roughly .290 to .300 over time, so a BABIP of .250 or .350 in one season usually says more about luck and defense than about the pitcher.

    A worked season line

    Here is an example starter's season (made-up numbers chosen to be realistic, not a real player):

    IPTBFHERBBHBPKHRSFSH
    180.0740160705051902052
    StatWorkingResult
    ERA9 × 70 ÷ 1803.50
    WHIP(50 + 160) ÷ 1801.17
    K/99 × 190 ÷ 1809.5
    BB/99 × 50 ÷ 1802.5
    HR/99 × 20 ÷ 1801.0
    K/BB190 ÷ 503.8
    K%190 ÷ 74025.7%
    BB%50 ÷ 7406.8%
    K-BB%25.7% − 6.8%18.9%
    FIP(13 × 20 + 3 × 55 − 2 × 190) ÷ 180 + 3.10 = 45 ÷ 180 + 3.103.35
    BABIPAB = 740 − 50 − 5 − 5 − 2 = 678; (160 − 20) ÷ (678 − 190 − 20 + 5) = 140 ÷ 473.296

    How to read it: a 3.50 ERA is comfortably better than a 4.00 league, and the 3.35 FIP says the ERA is earned, not luck. A .296 BABIP is normal, so there is no sign that hits on balls in play were unusually kind or cruel. A K-BB% near 19% points to a genuinely good pitcher, not one who got away with it.

    Reading a single start

    Take the line 6.1 IP, 5 H, 2 ER, 1 BB, 7 K. First convert 6.1 to 6.333 innings. The ERA for that start is 9 × 2 ÷ 6.333 = 2.84 and the WHIP is (1 + 5) ÷ 6.333 = 0.95. It is also a quality start: at least six innings with three or fewer earned runs. Single-game numbers like these are very noisy, which is why season rates and FIP matter more than one outing.

    Wins, losses, saves and holds

    • Win (W): goes to the pitcher of record when his team takes the lead for good. A starter must pitch at least five innings to be credited with the win.
    • Save (SV): a reliever who finishes a win without being the winning pitcher, and either enters with a lead of three runs or fewer and pitches at least an inning, enters with the tying run on base, at bat or on deck, or pitches at least three innings.
    • Hold (HLD): a reliever who enters in a save situation, records at least one out and leaves with the lead intact without finishing the game.
    • Blown save (BS): a reliever enters in a save situation and the tying run scores while he is in the game.

    Wins and saves say as much about the team's offense and the manager's choices as about the pitcher, which is why analysts lean on ERA, FIP, K% and BB% instead.

    Which pitching stats to trust, and when

    1. Early in the season: K% and BB% settle down within a few hundred batters faced; ERA and BABIP take far longer.
    2. Comparing two pitchers: use FIP or ERA+ alongside ERA, so park and defense do not decide the argument.
    3. Relievers: they throw so few innings that one bad night wrecks an ERA; look at K-BB% and WHIP.
    4. Tonight's game: the starter only covers part of it. How deep he goes and how rested the bullpen is matter as much, which is how BullpenEdge builds its daily MLB projections.

    For the pitch-level side of the game (velocity, spin rate, movement and workload) read Pitching analytics 101. If you follow basketball too, basketball stats explained does the same job for the box score and TS%, PER and usage rate. The BullpenEdge app page explains how the model weights starters, bullpens, ballparks and weather.

    Frequently asked questions

    How do you calculate ERA in baseball?

    ERA = 9 × earned runs ÷ innings pitched. Convert partial innings to thirds first: 6.1 innings is 6.333. A pitcher who allows 70 earned runs in 180 innings has a 3.50 ERA.

    What is WHIP in baseball?

    WHIP is walks plus hits per inning pitched: (BB + H) ÷ IP. Around 1.30 is roughly average in today's MLB, 1.10 is excellent and under 1.00 over a season is rare.

    What does 6.1 innings pitched mean?

    Innings are counted in outs, so 6.1 means six innings and one out (6⅓ innings) and 6.2 means 6⅔. There is no 6.3: three outs make 7.0.

    What is FIP and why is it better than ERA?

    FIP (fielding independent pitching) = (13 × HR + 3 × (BB + HBP) − 2 × K) ÷ IP + a yearly constant of about 3.1. It ignores balls in play, so defense and luck do not affect it, and it predicts future ERA better than ERA does.

    What is a quality start?

    A start of at least six innings with three or fewer earned runs allowed.

    Apps mentioned

    Related guides